NavCom SF-3040 Rev.F User Manual
Page 163
SF-3040 Product User Guide
– Rev. F
D-161
3. Verify that the ECHODGPSB message indicates
that RTCM 3.0 corrections are being received.
4. Verify that both the PVT1B and RTKSTATUS1B
screens indicate that the navigation status
achieves “RTK Dual Fixed: RTCM3-Dual Full”.
This may take several seconds.
5. Enter the following command to disconnect from
the caster:
[NTRIPCLIENT]DISCONNECT
Refer to the Sapphire Technical Reference Manual
for detailed instructions on the [ECHODGPSB],
[MODEMCONFIG], [NTRIPCLIENT],
[NTRIPSERVER], [OUTPUT], and [RTKMODE]
commands.
The NTRIP client and server cannot both
be active at the same time. An error
message will be displayed if any
keyword other than a status request or
DISCONNECT is issued to one while the
other is active.