NavCom SF-3040 Rev.F - Manual (Page 97)

SF-3040 Product User Guide
– Rev. F
4-95
Communication Port Connectivity
Connect the supplied LEMO 6-Pin connector of the
serial cable (PN 96-212169-01) COM 2 of the
SF-3040. Connect the DB9S end to the control
device.
In the Rover, the NMEA port is an output logical port
and may share the data physical port with RTCM,
CMR, or Sapphire GNSS RTK input corrections. In
the Base Station, the NMEA port should not share the
data port with any RTCM, CMR, or Sapphire GNSS
RTK output corrections as many NMEA-compatible
devices are likely to have parsing issues with the non-
NMEA data.
Refer to the Sapphire Technical Reference Manual
for the available port configuration settings.
Figure 51: Communication Port Connections