NavCom SF-3040 Rev.F User Manual
Page 58
SF-3040 Product User Guide
– Rev. F
2-56
prior to initialization.
This feature is available for StarFire GNSS
only.
The receiver must have a StarFire Dual
Frequency solution prior to initiating
QuickStart.
RapidRecovery is available only on the GPS
portion of the StarFire
correction, which
constitutes the larger weighted component
of the correction
RapidRecovery is not available for the first 5
minutes after a successful quick start is
completed.
When a lower FOM_limit value is input, the
receiver is more constrained in completing a
Rapid Recovery process.
In order for RapidRecovery to function, the
outages must not exceed 2 minutes.
Requires one minute to complete.
Option to manually enter coordinates to
initiate feature.
Unparalleled performance in spite of adverse signal
tracking conditions by incorporating the use of GPS
(L1, L2, L2C, L5), GLONASS (G1, G2), and SBAS
(WAAS, EGNOS, MSAS, GAGAN) signals.