NavCom SF-3040 Rev.F User Manual
Page 86
SF-3040 Product User Guide
– Rev. F
3-84
1
When the status is RUNNING or
PAUSED, the logged bytes are
displayed:
[LOGFILE]A: RUNNING 5245989
BYTES LOGGED
2
When the receiver is first turned on, or
when the USB mode is changed from
Mass Storage device mode to COM port
mode, the SD removable card is
reconfigured. If the user sends the
command [LOGFILE]A:,START before
the reconfiguration is finished, the
following message is output:
[LOGFILE]A: SD CARD IS BEING
MOUNTED, PLEASE WAIT
If the SDCARD message is turned on for this
port, the following [SDCARD] message is output:
[SDCARD] MOUNTING… 5
[SDCARD] MOUNTING… 6
[SDCARD] MOUNTING… 7
[SDCARD] MOUNTING…8
The numeral represents the SD card
mounting time in seconds. Upon
successful completion of mounting, data
logging starts.
If mounting fails, the following message
is output:
[LOGFILE]A: ERROR ON
MOUNTING SD CARD
If the SD card is not present and the
user sends the command