NavCom SF-3040 Rev.F User Manual
Page 44
SF-3040 Product User Guide
– Rev. F
1-42
7. Do not close StarUtil 3000. Perform one of these
steps:
If a StarFire License is purchased, go to the
Upload the StarFire License section.
If a StarFire License is not purchased, go to
the Factory Default User Profile section.
Confirm Software Options Are Uploaded to the
Receiver
The SF-3040 returns the entire list of
loaded software options. However,
StarUtil 3000 may not display the entire
list in the Software Options window.
Follow the below steps to confirm that all
software options successfully uploaded
to the receiver:
1. Type the command [INPUTSWOPTION] on the
Input Terminal window.
2. Click Send.
3. Highlight and copy the entire output.
4. Open any text editor (e.g., Microsoft Notepad) and
paste the output there to verify that all software
options have been uploaded to the receiver.
If the above method fails to upload any of
the purchased software options, refer to
the next section.