NavCom SF-3040 Rev.F - Manual (Page 118)

SF-3040 Product User Guide
– Rev. F
6-116
3. Slide a battery pack into the right or left chamber,
holding the locking clip to the side while inserting
the battery pack.
4. Push the locking clip back into place.
5. Repeat steps 2 through 4 with the second battery
pack.
6. Close the battery chamber door and press until it
clicks shut.
If both locking clips are not locked
in place, the battery packs can
disengage.
Figure 54: SF-3040 Battery Packs Installed in
Battery Chamber
Battery 2 Battery 1