Quintum Technologies Tenor AX - Manual (Page 113)

P/N 480-0062-00-10 6-33
Chapter 6: Advanced Topic: SNMP/IVR
Call Flow - Message Attributes
The sections which follow indicate the message attributes for specific message packets; the Quintum
vendor ID is 6618.
Start Accounting Request Message Attributes
Table 6-3 lists the message attributes in the Start Accounting Request message packet sent between
the Tenor AX and the RADIUS server. Start Accounting is optional.
Table 6-3 Start Accounting Request Message Attributes
IETF
Attribute
Number
Attribute Name
Vendor
Specific
Attribute
Number
Description
Value
Format
Sample
4 NAS-IP-Address IP Address of the requesting
Tenor AX Numeric 3506546880
26 Cisco-NAS- Port 2 Tenor AX's physical port on
which the call is active String Fxs1/0/1
61 NAS-Port-Type Tenor AX's physical port type String 0: Asynchronous
1 User-Name Account number, calling party
number, or blank String 7325551212
30 Called-Station-Id The IVR access number, nor-
mally an 800 number String 8004609000
31 Calling-Station-Id Calling Party Number (ANI) String 7329701330
40 Acct-Status-Type Account Request Type (start or
stop) Numeric 1: start, 2: stop
6 Service-Type Type of service requested Numeric 1: login
26 h323-gw-id 33 Name of the Tenor AX String Quintum Tenor AX
26 h323-conf-id 24 16 octets h323 GUID 16 octets
26 h323-incoming-conf-
id 1 A number to match multiple
calls in a session 16 octets
26 h323-call-origin 26 The call relation to the Tenor
AX String Answer, Originate etc
26 h323-call-type 27 Protocol type or family used on
this leg of the call String Telephony or VOIP
26 h323-setup-time 25 Setup time in NTP format
(hours, minutes, seconds,
microseconds, time_zone, day,
month, day_of_month, year) String
44 Acct-Session-Id A unique accounting identifier
- match start & stop String 13432
41 Acct-Delay-Time Number of seconds tried in
sending a particular record Numeric 5