Quintum Technologies Tenor AX - Manual (Page 114)

P/N 480-0062-00-10 6-34
Chapter 6: Advanced Topic: SNMP/IVR
Stop Accounting Request Message Attributes
Table 6-4 lists the message attributes in the Stop Accounting Request message packet sent between
the Tenor AX and the RADIUS server.
Table 6-4 Stop Accounting Request Message Attributes
IETF
ATTRIBUTE
NUMBER
Attribute Name
Vendor
Specific
Attribute
Number
Description
Value
Format
Sample
4 NAS-IP-Address
IP Address of the requesting
Tenor AX
Numeric 3506546880
61 NAS-Port-Type
Tenor AX's physical port type
on which the call is active
Numeric 0: Asynchronous
1 User-Name
Account number or calling
party number
String 7325551212
30 Called-Station-Id Destination phone number String 7324609000
31 Calling-Station-Id Calling Party Number (ANI) String 7329701330
40 Acct-Status-Type
Account Request Type (start
or stop)
Numeric 1: start 2: stop
6 Service-Type Type of service requested Numeric 1: login
26 Cisco-NAS-Port 2
Tenor AX's physical port on
which the call is active
String Fxs1/0/1
26 h323-gw-id 33 Name of the Tenor AX String Quintum Tenor AX
26 h323-conf-id 24 16 octets h323 GUID 16 octets
26
h323-incoming-
conf-id
1
A number to match multiple
calls in a session
16 octets
26 h323-call-origin 26
The call relation to the Tenor
AX
String Answer, Originate
26 h323-call-type 27
Protocol type used on this leg
of the call
String Telephony or VOIP
26 h323-setup-time 25 Setup time in NTP format String
26 h323-connect-time 28 Connect time in NTP format String
26
h323-disconnect-
time
29
Disconnect time in NTP
format
String
26
h323-disconnect-
cause
30 Q.931 disconnect cause code Numeric