Installation, Pre-installation guidelines, Inspect package contents – Quintum Technologies Tenor AX User Manual
Page 37: Installation -2, Pre-installation guidelines -2, Inspect package contents -2
3-2
P/N 480-0062-00-10
Chapter 3: Installation/Basic Troubleshooting
Installation
Before you begin the actual installation, review the pre-installation guidelines which follow and
inspect the package contents.
Pre-Installation Guidelines
•
Always use an anti-static wrist strap when handling the unit.
•
Do not open the unit cover. Inside parts have hazardous voltages and are extremely sensitive to
static. If the unit has been opened, our warranty is void.
•
Do not connect equipment in wet conditions and keep away from dusty areas.
•
The area must not exceed the temperature and humidity guidelines outlined in
.
•
Avoid exposing the unit to excessive vibrations.
•
Ensure no equipment is put on top of the unit.
•
Ensure there is clearance between the fan intake/exhaust on the side of the unit to avoid airflow
being blocked.
Inspect Package Contents
Before you install the hardware, ensure the following components are included in our shipment:
•
Tenor AX and Mounting Hardware
•
1 AC Power Cable
•
1 DB-9 RS-232 Serial Cable
•
RJ-45 Cable
•
Product Guide in CD format
If a listed component is not included in your package, contact your customer service representative.