Typical ivr network connection/process, Typical ivr network connection/process -13 – Quintum Technologies Tenor AX User Manual

Page 93

Advertising
background image

P/N 480-0062-00-10

6-13

Chapter 6: Advanced Topic: SNMP/IVR

Typical IVR Network Connection/Process

See Figure 6-2 for a typical network configuration for IP based pre-paid calling card/post-paid
account services. This figure illustrates the originating Tenor AX is configured to provide pre-paid/
post-paid services. All the subscribers will have to dial into this Tenor AX via PSTN to get access to
pre-paid/post-paid services.

Each process is denoted by a number (in bold); each number and the corresponding process is
explained in Table 6-1.

Figure 6-2 Typical Network Connection/Call Flow Process

Table 6-1 Call Flow Process for Figure 6-2

Number

Process

1

User dials access number to initiate call (e.g., 1-800-xxx-xxxxx).

2

Tenor AX answers call and determines user is calling a pre-paid service
based on the number dialed or the trunk group to which the call is trans-
ferred. Tenor AX sends Start Accounting to RADIUS server. Start Account-
ing is optional.

PSTN

Telephone

Telephone

Prepaid

Enable

Tenor

Destination

Tenor

IVR Prompt Server

Primary & Secondary

RADIUS

Server - Secondary

RADIUS Server

Primary & Secondary

PSTN

IP Network

1, 4, 5, 8, 9, 12

2, 3, 6, 7, 10, 11, 15, 16

13

13

14

RADIUS Server

Primary & Secondary

Prepaid Enable

Tenor AX

Destination Tenor AX

Advertising