Specifications, Voice/fax, Pstn/pbx connections – Quintum Technologies Tenor AX User Manual
Page 35: Lan connection, Physical, Electrical, Environmental, Specifications -11, Voice/fax -11, Pstn/pbx connections -11
P/N 480-0062-00-10
2-11
Chapter 2: Hardware Components
Specifications
Voice/Fax
Call Routing:
FXO/FXS/IP
Voice Algorithms:
G.723.1A (5.3, 6.3 Kbps), G.726 (16, 24, 32, 40 Kbps), G.729A, G711
Fax Support:
Group III at 2.4, 4.8, 7.2, 9.6, 12, 14.4 Kbps
Automatic Call Detection:Voice/Modem/Fax
PSTN/PBX Connections
Interface:
Analog, FXO Interface (PSTN side), FXS Interface (PBX side)
Connector:
50-PIN Telco
Ringing Voltage:
Adjustable/Country-specific
Ringing Cadence:
Adjustable/Country-specific
Maximum Loop Current: 24 mA
Ringer Equivalence Number:3 up to 1000 feet of 24 AWG or heavier
Ringing Frequency:
Adjustable/Country-specific
LAN Connection
LAN Support:
10/100 Mbps Ethernet
Connection Type:
Autosensing of speed and duplex
Physical
Position:
19” (48.7 cm) rack mountable, desktop stackable, wall-mountable
Depth:
10 3/4” (27.6 cm)
Length:
17 3/8” (44.5 cm)
Height:
1 3/4” (4.5 cm)
Weight:
10 lbs (4.55 kg)
Electrical
Ethernet: Standard
10/100Base-T RJ-45 interface (IEEE 802.3)
Connectors:
50-pin Telco Connector for FXO connection
50-Pin Telco Connector for FXS connection
Console Port:
RS-232/DB-9 Female
Power:
AC Power at 100-240 volts and 50-60 Hz, 70 Watts max
Environmental
Operating Temperature: 40° to 104 °F (5°-40° C)
Operating Humidity:
20% to 80% non-condensing
Altitude:
-200 to 10,000 feet, or -60 to 3,000 meters
Storage Temperature:
14° to 140° F, or -10° to 60° C