Teac SS-CDR200 - Manual (Page 14)

14
TASCAM SS-CDR200/SS-R200/SS-R100
While pressing and holding the SHIFT button, turn the
MULTI JOG dial to adjust the display contrast.
[Button functions]
Use to confirm selections and settings (ENTER
function).
Press when the
FINDER
screen is open to open the
FINDER
menu pop-up for the selected folder or file.
(See “File operations” and “Folder operations” on page
51.)
p STOP button
Stops playback and recording.
In
PROGRAM
playback mode, press when stopped to
clear the entire program.
a PLAY button/indicator
Press when stopped or in playback standby to start
playback.
Press in recording standby to start recording.
During playback or recording, this button lights.
When jogging during playback, this button blinks.
s READY [CALL] button/indicator
Press when stopped or during playback to switch to
playback standby.
Press when recording to switch to recording standby.
The button lights when in playback standby and
recording standby.
The button blinks when jogging during playback.
When in playback standby, press this button to search
for the call point (point from where playback last
started from playback standby) and switch to playback
standby. (See “Call function” on page 31.)
d RECORD [TRK INC] button/indicator
Press when stopped to start recording standby.
Press when recording to start a new track and continue
recording without interruption.
The button lights when recording and in recording
standby.
Press when there is no media in the current device
to activate input monitoring, causing the currently
selected input signal to be output. The button blinks
during input monitoring.
f KEYBOARD connector
Connect an IBM PC-compatible keyboard with a PS/2
interface here.
By default, the recorder is set to use an English
keyboard. To use Japanese keyboards, which are
arranged differently from English keyboards, change
the setting in the
UTILITY
menu. (See “Setting the
keyboard language” on page 73.)
2 − Names and functions of parts