Teac SS-CDR200 - Manual (Page 80)

80
TASCAM SS-CDR200/SS-R200/SS-R100
Media and file formats
Recording media
USB memory (512MB – 64GB)
SD card (512MB – 2GB)
SDHC card (4GB – 32GB)
CF card (512MB – 64GB, Type I only)
CD-R, CD-R-DA, CD-RW, CD-RW-DA (5-inch, 3-inch, High
Speed CD-RW supported) (CDR200 model only)
Recording and playback file formats
MP3: 44.1/48kHz, 64/128/192/256/320kbps
WAV: 44.1/48kHz, 16/24-bit (24-bit playback only)
CD-DA: 44.1kHz, 16-bit
Number of channels
2-channel (stereo)
1-channel (mono)
Inputs and outputs
Analog audio inputs and outputs
ANALOG INPUTS (BALANCED)*
(SS-CDR200/SS-R200 only)
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 22 kΩ
Nominal input level: +4 dBu (1.23 Vrms)
Maximum input level: +20 dBu (7.75 Vrms)
Minimum input level: −6 dBu (0.39 Vrms) or more
(minimum input level adjustable to nominal level)
ANALOG INPUTS (UNBALANCED)
Connector: RCA pin jack
Input impedance: 22 kΩ
Nominal input level: −10 dBV (0.316 Vrms)
Maximum input level: +6 dBV (2.0 Vrms)
Minimum input level: −20 dBV (0.1 Vrms) or more
(minimum input level adjustable to nominal level)
ANALOG OUTPUTS (BALANCED)*
(SS-CDR200/SS-R200 only)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω
Nominal output level: +4 dBu (1.23 Vrms)
Maximum output level: +20 dBu (7.75 Vrms)
ANALOG OUTPUTS (UNBALANCED)
Connector: RCA pin jack
Output impedance: 200 Ω
Nominal output level: −10 dBV (0.316 Vrms)
Maximum output level: +6 dBV (2.0 Vrms)
*If you want to change the maximum balanced input and
output levels, please contact TASCAM customer support.
Digital audio inputs and outputs
DIGITAL IN JACK
Connector: RCA pin jack
Formats: IEC60958-3 (S/PDIF) and AES3-2003/IEC60958-4
(AES/EBU) detected automatically (AES3-2003/IEC60958-4
(AES/EBU) is a data format only; the physical format
conforms to IEC60958-3 (S/PDIF))
Supported input sampling frequencies: 32–48 kHz
DIGITAL OUT JACK
Connector: RCA pin jack
Formats: IEC60958-3 (S/PDIF) and AES3-2003/IEC60958-4
(AES/EBU) switchable (AES3-2003/IEC60958-4 (AES/EBU)
is a data format only; the physical format conforms to
IEC60958-3 (S/PDIF))
Control inputs and outputs
REMOTE JACK (for RC-3F and RC-20)
Connector: 2.5mm TRS jack
USB PORT
Connector: USB A-type 4-pin
Protocol: USB 2.0 HIGH SPEED (480 Mbps)
KEYBOARD
Connector: mini-DIN connector (PS/2)
REMOTE IN (RC-SS2)
Connector: 3.5mm TRS jack
RS-232C CONNECTOR (SS-CDR200/SS-R200 only)
Connector: 9-pin D-sub
CONTROL I/O PARALLEL (SS-CDR200/SS-R200 only)
Connector: D-sub 25-pin
Maximum input voltage: +5.5 V
High level minimum input voltage: +3.75 V
Low level maximum input voltage: +1.25 V
Output format: open drain (withstand voltage 50 V,
maximum 50 mA)
Low level maximum output voltage: 0.5 V
+5V power maximum supplied current: 100 mA
Audio performance
Frequency response
20 Hz – 20 kHz: ±0.5 dB
Distortion
0.005% or less
S/N ratio
95 dB or more
Dynamic range
95 dB
Channel crosstalk
17 − Specifications