Teac SS-CDR200 - Manual (Page 68)

68
TASCAM SS-CDR200/SS-R200/SS-R100
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the device.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select the copy
destination device.
NOTE
• If the selected device media is still being read, MEDIA
READ
and a progress bar appear in a pop-up.
• If the selected device media is not loaded, after MEDIA
READ
,
ERROR
and the media type (
CF READ
, etc.)
appears in a pop-up.
6 Press the MULTI JOG dial (or remote control ENTER
button) to open the RIP
SOURCE SELECT
screen.
7 Select the file or folder to copy from the
RIP
SOURCE SELECT
screen. If you select a folder, all
the files in the folder will be copied.
To select multiple files or folders, when the desired
file or folder is selected, press the FUNCTION
button (or remote control FUNC button). Repeat
this for every file and folder.
Checkmarks (
4
) are placed next to selected files
and folders. You can only select multiple files and
folders if they are in the same folder.
To deselect a selected file or folder, press the
FUNCTION button (or remote control FUNC button)
once again.
NOTE
• You can select multiple files and folders only within the
same folder, so once you use the FUNCTION button (or
remote control FUNC button) to select the first file or
folder, you will no longer be able to move to a different
folder.
• If you are selecting only one file or folder, there is no
need to press the FUNCTION button (or remote control
FUNC button). After selecting the desired file, proceed
to step 5.
8 When you have selected all of the files you want to
copy, press the MULTI JOG dial (or remote control
ENTER button) to confirm the selections and open
the
RIP TARGET SELECT
screen where you can
select the copy destination.
NOTE
If the size of the source exceeds the remaining capacity
of the selected media, or the number of source tracks
would cause the number of files on the selected media
to exceed the limit file, a
CAPACITY OVER
or a
TRACK
OVER
message pop-up will appear accordingly, and you
will not be able to confirm the source selection. If this
occurs, press the STOP button to close the pop-up, and
deselect some source files until the total size or number
is acceptable. Then, press the MULTI JOG dial (or remote
control ENTER button) again.
9 Select the copy destination from the
RIP TARGET
SELECT
screen.
The folders or files will be copied after the selected
folder or file.
10 Press the MULTI JOG dial (or remote control ENTER
button) to confirm the copy destination.
A confirmation pop-up message appears.
NOTE
If there are files with the same name, the following
pop-up message will appear.
After this, the pop-up message disappears and the
CD
menu screen opens.
11 Press the MULTI JOG dial (or remote control ENTER
button) again to start writing to the selected device
media.
-- RIP --
and a progress bar appear in a pop-up
while the files are copied.
When writing is completed, the
CD
menu screen will
reopen.
10 - Copying files between CDs and other media (SS-CDR200)