Operation messages, 15 − message list – Teac SS-CDR200 User Manual
Page 78
78
TASCAM SS-CDR200/SS-R200/SS-R100
1st line
2nd line
Meaning
20
- caution -
SURE TEXT
CD Text has been added, but you are trying to eject the disc without writing the TOC.
(SS-CDR200 only)
21
- caution -
SAME NAME
An item with the same name already exists. (SS-CDR200 only)
22
Unapproved
FAT format
The media has been formatted by something other than this unit, and this can cause
the following problems.
i
When recording, writing data might not occur in time, resulting in errors.
i
MEDIA READING
will take more time.
We recommend using media that has been formatted by this unit.
Operation messages
As necessary, the following messages will appear in the time display area.
1st line
Meaning
1
POWER ON
The system is starting up and initializing.
2
DEVICE ERROR
The device cannot be detected. Please contact TASCAM customer support.
3
NO MEDIA
Media is not loaded in the current device.
4
MONITOR
Now monitoring inputs.
5
MEDIA READING
Now reading from media.
6
MEDIA ERROR
Failed to read media.
7
UNKNOWN
The media is in a format other than FAT. Format the media with the unit in order to use
them together.
8
INITIALIZING MEDIA
Creating data in order to use this media with the unit.
9
RECORD STAND BY
Now in recording standby.
10
INFORMATION WRITING
Now writing recording information.
11
FLASH LOADING
Now loading flash-start data.
12
Fs CHANGING
The system’s sampling frequency is being changed to match that of the current track.
15 − Message list