Teac SS-CDR200 - Manual (Page 63)

TASCAM SS-CDR200/SS-R200/SS-R100
63
You can copy (or convert and copy) files on USB/SD/CF
media to a blank CD. You can also copy (or convert and
copy) files on a CD to USB/SD/CF media.
Copying is only possible from the
CD
menu, so set the
current device to
CD
. Before conducting the following
operations, load appropriate CD and USB/SD/CF media in
the unit.
NOTE
You cannot copy to a write-protected SD card. (See “SD
card write-protection” on page 26.)
Copy/convert and copy files from USB/
SD/CF media to blank CDs
When copying MP3 or WAV files from USB/SD/CF media to
a blank CD, you can copy the files in the same file format
to make a data CD or convert the files into audio CD
format when copying.
If you select audio CD format, MP3 and WAV files on USB/
SD/CF media will be converted to audio CD format and
copied to a blank CD.
If you use an unfinalized CD-R/CD-RW disc that already
has tracks on it, the disc format is already set as audio CD
or data CD, and that format must be used.
NOTE
• This unit cannot record WAV files to CD-R/CD-RW discs,
but WAV files can be copied from USB/SD/CF media to
CD-R/CD-RW discs.
• This unit can play back WAV files copied to CD-R/
CD-RW discs.
Creating audio CDs
The following describes how to convert MP3 or WAV files
on USB/SD/CF media to audio CD format and write them
to a CD-R/CD-RW disc.
The following procedure assumes that
CD
is selected as
the current device and that the USB/SD/CF media that
contains the copy-source files and the CD-R/CD-RW that is
the copy destination are loaded in the unit.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
CD
menu.
3 Select
BURN TO CD
.
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the source device.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select the device that
contains the files to be copied.
6 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the CD-R/CD-RW disc format.
NOTE
• If the selected device media is still being read, MEDIA
READ
and a progress bar appear in a pop-up.
• If media is not loaded in the selected device, MEDIA
READ
appears in a pop-up followed by
ERROR
and the
media type (e.g.
CF READ
).
7 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select
CD-DA
.
NOTE
If audio format files have already been written to the
CD-R/CD-RW disc, the above pop-up window will not
appear.
CD-DA
format will be selected automatically.
8 Press the MULTI JOG dial (or remote control ENTER
button) to open the
BURN SOURCE SELECT
screen
for the selected media.
9 Select the tracks to copy to the CD-R/CD-RW disc
from the
BURN SOURCE SELECT
screen.
You cannot select a folder.
To select multiple files, when the desired file is
selected, press the FUNCTION button (or remote
control FUNC button). Repeat this for each file.
Checkmarks (
4
) are placed next to selected files.
You can only select multiple files that are in the
same folder.
To deselect a selected file, press the FUNCTION
button (or remote control FUNC button) once
again.
NOTE
• You can select multiple files only within the same
folder, so once you use the FUNCTION button (or
10 - Copying files between CDs and other media (SS-CDR200)