Verilink AS100 (896-502379-001) Product Manual - Manual (Page 73)

Access System Centum Series User Manual 5-7
Event Printing
Unit ID Seq. Num Time Date Status Event
0012345 01155 10:39:39 02/25 End PORT 1 LL
F ORMAT AND S AMPLE E NTRY
Type Text Description
System UNIT START Centum Series Power Up of Initialization Sequence
BRAM CLEAR Non-Volatile Memory has been Cleared
CFG ERROR Error Detected in Non-Volatile Memory
Alarm NI RED Network Interface is in Red Alarm
NI AIS Network Interface is Receiving all “Ones” (AIS)
NI YEL Network Interface is Receiving Yellow Alarm
NI CRC Network Interface is Experiencing CRC6 Errors
NI FSS Network Interface is in a Failed Signal State
NI FERR Network Interface is Experiencing Framing Errors
DSX-1 RED DSX-1 Interface is in Red Alarm
DSX-1 AIS DSX-1 Interface is Receiving all “Ones” (AIS)
DSX-1 YEL DSX-1 Interface is Receiving Yellow Alarm
DSX-1 CRC DSX-1 Interface is Experiencing CRC6 Errors
DSX-1 FERR DSX-1 Interface is Experiencing Framing Errors
Diagnostic DTE1 LL Serial Port #1 is in Local Digital Loopback
DTE2 LL Serial Port #2 is in Local Digital Loopback
DTE1 RL Serial Port #1 is in Remote Digital Loopback
DTE2 RL Serial Port #2 is in Remote Digital Loopback
NI LLB The Network Interface is in Local Line Loopback
NI RLB The Network Interface is in Remote Line Loopback
NI PLLB The Network Interface is in Payload Loopback
NI CSU LL The Network Interface is in Local CSU Loopback
Indications DTE 1 CONN Serial Port #1 is Connected (DTR/RTS Asserted)
DTE 1 DISC Serial Port #1 is Disconnected
DTE 2 CONN Serial Port #2 is Connected (DTR/RTS Asserted)
DTE 2 DISC Serial Port #2 is Disconnected