Verilink AS100 (896-502379-001) Product Manual - Manual (Page 81)

Access System Centum Series User Manual 6-7
4. The Centum Series unit will respond with the following text:
The Centum Series port depends on RTS from a terminal (or CD from a
modem) to indicate a connected device. Every time that RTS (or CD) is
lowered and subsequently raised, Centum Series assumes the possibility
that a different terminal type is attached and therefore queries the attached
device with a generic Terminal Selection message (see above). If this
message does not appear on the screen, temporarily disconnect and
reconnect the cable.
After selecting a terminal type, the user is presented with a Main Menu on
the CRT screen and is allowed access to all configuration, test, and query
functions provided by Centum Series.
Add 1 screen
Verilink Corporation
Access System 150
Terminal Selection Menu
(A) A.D.D.S. Viewpoint (B) A.D.D.S Regent 25
(C) Data General DASHER (D) Datamedia 1521
(E) Datamedia EXCEL 30 (F) DEC VT-52
(G) DEC VT-100/131/220 (H) IBM 3101
(I) Datamedia EXCEL 42 (J) FREEDOM 100
(K) ICL 6401 (L) L.S.I. ADM 11, 31
(M) Qume QVT-102, 108 (N) Televideo 900 Ser.
(O) Wyse WY-50 (P) Paradyne 7811
(Q) Teletype 5410, 5425 (R) ATTIS 4410, 4425
==> Enter Terminal Selection..