Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 103)

V T 1 0 0 I n t e r f a c e 4-29
CHAP Table and Details Screens
From the PPP Service Details screen, select “CHAP Table” to view a table of
the CHAP Username and Secret information for each of 10 entries. This table
and its Details screen look the same as the PAP Table and Details screens.
Choose an Index number to bring up a screen in which you can change the
Username and Secret information for that particular CHAP Index.
To change the Username and Secret for a selected CHAP Index, enter the new
information in the appropriate field(s) and press the “Esc” key.
IP Service Details Screen
The IP Service Details screen (Figure 4.10), accessed by selecting “IP” from the
<Type> column in the IP Service screen, lets you configure the IP parameters
described on page 4-15.
To change any of the available parameters, you must enter new values in the
appropriate field(s) and press the “Esc” key to save your changes.
NOTICE: To use newly established IP parameters, you must “Save and Restart.”
(See "Save and Restart" on page 4-6.)
Applications
Select “Applications” in the Main Menu screen to display the various FSM
applications (Figure 4.22) associated with configuration tables and statistics
that do not map to a specific service or interface.
Figure 4.22 Applications Screen
Endpoint Table Screen
The Endpoint Table (Figure 4.23) describes all endpoints terminating in the
unit; user-selectable prompts are provided to view the Endpoint Details,