Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 93)

V T 1 0 0 I n t e r f a c e 4-19
Figure 4.14 Channel Table Details Screen
The channel map displayed in a TDM Details screen for Network services lets
you establish the Rate and Service parameters for any available channel.
These parameters are described below
Rate The unit can operate at any data rate that is a multiple of 64 kbps.
Default: 64K
Service Specifies the Service to which this Channel is allocated. Refer to the Service
Table to see how the current Services are configured.
Idle Pattern Selects the idle pattern sent by the unit and lets the unit determine if the idle
pattern has been sent by the other end.
Values: 0
−
255
Default: 127
Frame Relay Service Details Screen
Access the Frame Relay Service Details screen (Figure 4.15) by selecting
“Frame Relay” under the <Type> column on the Service Table screen.