Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 31)

W e b S e r v e r I n t e r f a c e 3-7
LOSS Sets the Loss of Signal Seconds (LOSS) threshold. A LOSS is a 1-second
period in which the T1 received signal is interrupted. The default value is 5
seconds.
UAS Sets the Unavailable Seconds (UAS) threshold. A UAS is a 1-second period
in which consecutive severely errored seconds cause an unavailable state. The
default is 0 (zero) seconds (Disabled).
CSS Sets the Controlled Slip Seconds (CSS) threshold. The default is 0 (zero)
seconds (Disabled).
BPVS Sets the Bipolar Violation Errored Seconds (BPVS) threshold. A BPVS is a 1-
second period in which at least one bipolar violation occurred. The default is
0 (zero) seconds (Disabled).
OOFS Sets the Out of Frame Seconds (OOFS) threshold. An OOFS is a 1-second
period in which a frame sync loss occurred. The default value is 5 (five)
seconds.
AISS Sets the Alarm Indication Signal Seconds (AISS) threshold. An AIS is a 1-
second period when unframed all ones are received. The default is 0 (zero)
seconds (Disabled).
RAS Sets the Remote Alarm Seconds (RAS) threshold. A RAS is generated by the
terminal equipment when an improper signal is received from the facility (or
upon receipt of unframed all ones). The default is 0 (zero) seconds (Disabled).
Reset Timer Sets the Reset Timer threshold. This field is the contiguous number of
seconds that an alarm parameter must be clear before the alarm is reset.
Applicable values range from 000 through 900. A value of “000” means that
the alarm will never be reset.
The Network screen provides the following user-activated buttons:
CAUTION: Performance data will be lost upon power cycle or after performing a
Maintenance Reset or a Save and Restart.
Button Function
Submit Sets any values that have been changed.
Clear Alarms Resets the alarm conditions and counts to zero.
Performance Displays a Performance/Summary screen (Figure 3.5) that shows
a current count of the number of error events that have occurred
over the past 24 hours and the past 30 days.
Channels Displays the Channel Table Details Screen on page 3-19, showing
each channel by index number. Each channel’s rate and service
(by number) are displayed and can be changed through user input.
Network Services Displays the Services screen for the Network interface.
Refresh Refreshes data on the current page.