Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 112)

4-38 F r a m e S t a r t F S M
Figure 4.29 SNMP Details Screen
Read Community Accepts a character string identifying the group authorized to perform read
operations. The default setting is “Public.”
Write Community Accepts a character string identifying the group authorized to perform write
operations. The default setting is “Private.”
Trap Community Accepts a character string, which is included in SNMP traps generated by the
unit. The default setting is “Public.”
Trap IP Address Accepts the IP address of a network device where alarm reporting traps are to
be sent.
Diagnostics Screen
The Diagnostics screen () provides a table for viewing the current settings for
the test and maintenance functions performed on the available interfaces. This
screen shows an upper-level view of all the interfaces so you can see if any
port is under test, and if so, view the results. You may change Diagnostic
parameters on the Test Details screen (Figure 4.30), which is accessed by
selecting the appropriate interface under the <Description> column. The
properties of the Diagnostics table are described in the paragraphs below.