Ethernet connection pin assignments, Network interface pin assignments, Serial port interface pin assignments – Verilink FrameStart FSM (34-00299.E) Product Manual User Manual
Page 146: Network
A-8
F r a m e S t a r t F S M
Ethernet Connection Pin Assignments
The
10/100 ETHERNET
interface is an eight-pin modular jack that complies
with standard twisted-pair, 10Base-T requirements.
Network Interface Pin Assignments
The network physical interface (
NET
) is a standard RJ-48C, eight-pin modular
jack. The table below displays the pinout assignments.
Serial Port Interface Pin Assignments
The
Serial Interface
is a standard DB-9, nine-pin modular jack. The table
below displays the pinout assignments.
Pin
Ethernet Interface
1
Data Out (+)
2
Data Out (-)
3
Data In (+)
6
Data In (-)
Pin
T1 NET Interface
1
Data In
2
Data In
3, 6
Not used
4
Data Out
5
Data Out
7, 8
Chassis Ground
Pin
DCE Mode
DTE Mode
1
DCD out
LL out
2
Rx Data out
Tx Data out
3
Tx Data in
Rx Data in
4
DTR in
DSR in
5
Signal Ground
Signal Ground
6
DSR out
DTR out
7
RTS in
CTS in
8
CTS out
RTS out
9
No connect
No connect