Power failure, Power failure -8 – Verilink FrameStart FSM (34-00299.E) Product Manual User Manual
Page 20
Advertising
1-8
F r a m e S t a r t F S M
NOTICE:
Per UL 1950 and CSA 950 Clause 1.7.2, if the power supply cord is
intended to serve as a disconnect device, an easily accessible socket
must be installed near the equipment.
Power Failure
If the indicator does not illuminate, check the power connections and the
primary AC circuit breaker.
The FrameStart FSM provides non-volatile memory retention of the unit
configuration in case of a power failure. This feature allows the unit to
automatically restore normal service following a power loss and retain
pre-existing time and date information.
NOTICE:
Configuration parameters have not been stored into non-volatile
memory until the
Mode
LED is green.
Advertising