Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 73)

W e b S e r v e r I n t e r f a c e 3-49
Use of Connected Local Router
If this method is used, no configuration is required in the FSMs. Router A
will route Web/SNMP frames from the PC to the remote FSMs. The remote
FSM IP address must be set within the same network as the remote routers B
and C LAN network.
Figure 3.38 Frame Relay Network, Connected Local Router
If the remote FSMs are required to have an IP address in different Networks
from the remote routers, a static route will have to be configured in the local
router (Router A) for each remote FSM to manage. If Router A becomes
unavailable, there is no way to reach the remote FSMs.
PC
Router
A
FSM
FSM
FSM
Router
C
Router
B