Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 104)

4-30 F r a m e S t a r t F S M
Endpoint Service Details, and Endpoint DLCI Details screens. The unit will
automatically learn all DLCIs from the network side and relay that
information on the serial side with default values.
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database either when you perform a “Save and Restart” or
automatically every 15 minutes.
Figure 4.23 Endpoint Table Screen
You can add an endpoint in the Add Endpoint field and, when the screen
refreshes, you will be able to view that endpoint’s associated parameters. For
most applications, you will not have to modify the Endpoint Table and DLCI
Table.
Endpoint Details Screen
Select the <NDX> number to view the Endpoint Details screen (Figure 4.24),
which provides you with access to the configuration parameters described
below.
Figure 4.24 Endpoint Details Screen