Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 72)

3-48 F r a m e S t a r t F S M
Figure 3.36 Password Screen
To change the password, you must enter it once in the New Password field
and then re-enter the same password in the Confirm Password field. After
entering the new password in both these fields, click the “Change Password”
button to update and establish the new password.
NOTICE: Remember that passwords are case-sensitive and are limited to no more
than 10 characters. When logging on, password must be entered exactly
as it was programmed.
Log Out
The Log Out screen (Figure 3.37) is used to log you off the Web Server. The
Log Out function is only available after user password protection has been
set. You will be automatically logged out of the system 1 hour after you log
on using a password to gain access; after this, you will be required to enter
the password to gain write access.
Figure 3.37 Log Out Screen
In-band Management
There are two ways to implement remote in-band management of an FSM
unit. The first is to use the local router to route management frames (Web
browser or SNMP) between the local LAN and the remote unit. The second is
to use the local FSM unit as an independent gateway.