Save and restart, Interfaces screen, Save and restart -6 – Verilink FrameStart FSM (34-00299.E) Product Manual User Manual
Page 80: Interfaces screen -6
Advertising
4-6
F r a m e S t a r t F S M
Figure 4.4
Confirmation Screen
NOTICE:
Performing a “Maintenance Reset” or a “Save and Restart” will
terminate communications with the unit. Refresh (by pressing
“Ctrl+U”) after approximately 10 seconds to restore communications.
Save and Restart
Selecting “Save and Restart” will display a confirmation menu similar to that
shown in Figure 4.4. Select “yes” to save current configuration settings.
Interfaces Screen
The Interfaces screen in Figure 4.5 displays a list of all the unit’s available
interfaces.
Figure 4.5
Interfaces Screen
From the Interfaces screen, you may choose from the following: Network,
Serial, Ethernet, or Supervisory.
Advertising