Verilink QUAD/IMUX (880-502392-001) Product Manual - Manual (Page 17)

Overview
Verilink QUAD/IMUX User Manual
1-9
Table 1-4 DTE Interface Modules for IMUX 2160
DTE Adapter
Cables
For the HSSI interface type, the connector present on the DIM 2660
rear connector module is the 50-pin mini D-sub connector
described in the HSSI specification. Use a 50-pin mini D-sub male-
to-male straight-through cable to connect the DTE, such as Verilink
P/N 458-502204-015.
For interfaces other than HSSI, the rear connector module (DIM) has
a 26-pin mini-D SUB connector. An adapter (pigtail) cable is
provided which presents the typical connector type for the
electrical interface. These cables are described in
Table 1-5 .
Table 1-5 IMUX 2160 DTE Interface Adapter Cables
DTE Interface Modules for IMUX 2160
Module
Electrical
Interface Physical Interface
Bandwidth
Capacity
DIM 2660 HSSI 50-pin Amplimite 16 Mbit/s
DIM 2635 V.35 Winchester 34-pin 6 Mbit/s
DIM 2650 EIA 530A DB-25 6 Mbit/s
DIM 2651 EIA 530 DB-25 6 Mbit/s
DIM 2652 RS-449 DB-37 6 Mbit/s
Cable P/N
Electrical
Interface Connector Presented
458-501594-001 ITU V.35 Winchester 34-pin female
458-502059-001 RS-449
(RS-422)
DB-37 female
458-502045-001 EIA 530 DB-25 female