Verilink QUAD/IMUX (880-502392-001) Product Manual User Manual

Page 48

Advertising
background image

E1 Configuration Menus

3-10

Verilink QUAD/IMUX User Manual

Figure 3-7 QUAD 2164 Administration Menu, Network Parameters

Table 3-6

E1 QUAD 2164 Administration Menu

Command/Field

Description

D) Set Date

T) Set Time

Z) Set Zone

Date/Time/Zone—This field displays the QUAD 2164 module’s current date and

time.

To change the time zone, type “Z”. At the Select Timezone prompt, select, local

time, Eastern Standard Time (EST), Central Standard Time (CST), Mountain

Standard Time (MST), and Pacific Standard Time (PST). To create your own time

zone specification, or to specify a time zone not shown, select custom and enter

the necessary information.

To change the date, type “D”. Enter the new date as the number of the month

(01-12), number of the day of the month (01-31), and the last two digits of the

current year (e.g., 97).

To change the time, type “T”. Enter the new time as the number of hours (00-

24), number of minutes (00-60), and number of seconds (00-60).

Note: Set the time zone before setting the time.

A

Node Address—This field displays the QUAD’s node ACP address. To change

this address, type “A” and enter a new four-byte address.

1) Ethernet 2 (DIX)

2) 802.3

This field displays the Ethernet framing type configured for the card. To change

this specification, type “N” (network parameters), then “T” (ethernet type). If

your network uses TCP/IP, select 1) Ethernet 2. See

Figure 3-7

.

IP Address

This field displays the IP address for the card. To change this address, type “N”

(network parameters), then “I” (Ethernet IP address). See

Figure 3-7

.

Sub-net Mask

This field displays the Ethernet sub-net mask for the card. To change this value,

type “N” (network parameters), then “M” (Ethernet subnet mask). See

Figure

3-7

.

-- ACE CONTROLLER ADMINISTRATION MENU --

-- ACE CONTROLLER ADMINISTRATION MENU --

-- ACE CONTROLLER ADMINISTRATION MENU --

-- ACE CONTROLLER ADMINISTRATION MENU --

Date/Time/Zone: 3-29-98 21:44:51

Date/Time/Zone: 3-29-98 21:44:51

Date/Time/Zone: 3-29-98 21:44:51

Date/Time/Zone: 3-29-98 21:44:51
Node Address: [not set]

Node Address: [not set]

Node Address: [not set]

Node Address: [not set]
Ethernet Type Ethernet 2

Ethernet Type Ethernet 2

Ethernet Type Ethernet 2

Ethernet Type Ethernet 2
IP Address: [0.0.0.0]

IP Address: [0.0.0.0]

IP Address: [0.0.0.0]

IP Address: [0.0.0.0]
Sub-net mask: [0.0.0.0]

Sub-net mask: [0.0.0.0]

Sub-net mask: [0.0.0.0]

Sub-net mask: [0.0.0.0]
Slip Address: [0.0.0.0]

Slip Address: [0.0.0.0]

Slip Address: [0.0.0.0]

Slip Address: [0.0.0.0]
Slip sub-net mask: [0.0.0.0]

Slip sub-net mask: [0.0.0.0]

Slip sub-net mask: [0.0.0.0]

Slip sub-net mask: [0.0.0.0]
Trap Addresses: [0.0.0.0] [0.0.0.0]

Trap Addresses: [0.0.0.0] [0.0.0.0]

Trap Addresses: [0.0.0.0] [0.0.0.0]

Trap Addresses: [0.0.0.0] [0.0.0.0]
[0.0.0.0] [0.0.0.0]

[0.0.0.0] [0.0.0.0]

[0.0.0.0] [0.0.0.0]

[0.0.0.0] [0.0.0.0]
Gateway Address: [0.0.0.0]

Gateway Address: [0.0.0.0]

Gateway Address: [0.0.0.0]

Gateway Address: [0.0.0.0]
Read Community string:

Read Community string:

Read Community string:

Read Community string:
Write Community string:

Write Community string:

Write Community string:

Write Community string:

System uptime: 0:08:28

System uptime: 0:08:28

System uptime: 0:08:28

System uptime: 0:08:28
ACP bus: A

ACP bus: A

ACP bus: A

ACP bus: A
I) ethernet ip address L) slip address

I) ethernet ip address L) slip address

I) ethernet ip address L) slip address

I) ethernet ip address L) slip address
M) ethernet subnet mask S) slip subnet mask

M) ethernet subnet mask S) slip subnet mask

M) ethernet subnet mask S) slip subnet mask

M) ethernet subnet mask S) slip subnet mask
G) gateway ip address W) SNMP write community string

G) gateway ip address W) SNMP write community string

G) gateway ip address W) SNMP write community string

G) gateway ip address W) SNMP write community string
T) ethernet type R) SNMP read community string

T) ethernet type R) SNMP read community string

T) ethernet type R) SNMP read community string

T) ethernet type R) SNMP read community string
Pn) trap addresses X) back

Pn) trap addresses X) back

Pn) trap addresses X) back

Pn) trap addresses X) back

Advertising