Verilink QUAD/IMUX (880-502392-001) Product Manual User Manual
Page 58
T1 Configuration Menus
4-6
Verilink QUAD/IMUX User Manual
Figure 4-4 T1 Alarm Options Menu
Table 4-4
T1 Alarm Options Menu
-- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)--
-- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)--
-- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)--
-- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)--
N) NMS Address: 128.0.0.0
N) NMS Address: 128.0.0.0
N) NMS Address: 128.0.0.0
N) NMS Address: 128.0.0.0
D) Alarm declare time: 1
D) Alarm declare time: 1
D) Alarm declare time: 1
D) Alarm declare time: 1
A) Card Alarm Reporting: YES
A) Card Alarm Reporting: YES
A) Card Alarm Reporting: YES
A) Card Alarm Reporting: YES
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4
Pn) Alarm Reporting YES YES YES YES
Pn) Alarm Reporting YES YES YES YES
Pn) Alarm Reporting YES YES YES YES
Pn) Alarm Reporting YES YES YES YES
Ln) Line Restoral AUTO AUTO AUTO AUTO
Ln) Line Restoral AUTO AUTO AUTO AUTO
Ln) Line Restoral AUTO AUTO AUTO AUTO
Ln) Line Restoral AUTO AUTO AUTO AUTO
Cn) CRC Threshold 0 0 0 0
Cn) CRC Threshold 0 0 0 0
Cn) CRC Threshold 0 0 0 0
Cn) CRC Threshold 0 0 0 0
Sn) SES Threshold 0 0 0 0
Sn) SES Threshold 0 0 0 0
Sn) SES Threshold 0 0 0 0
Sn) SES Threshold 0 0 0 0
Un) UAS Threshold 0 0 0 0
Un) UAS Threshold 0 0 0 0
Un) UAS Threshold 0 0 0 0
Un) UAS Threshold 0 0 0 0
Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE
Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE
Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE
Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE
Tn) TOD HH:MM 00:00 00:00 00:00 00:00
Tn) TOD HH:MM 00:00 00:00 00:00 00:00
Tn) TOD HH:MM 00:00 00:00 00:00 00:00
Tn) TOD HH:MM 00:00 00:00 00:00 00:00
In) Clear Interval 30 30 30 30
In) Clear Interval 30 30 30 30
In) Clear Interval 30 30 30 30
In) Clear Interval 30 30 30 30
X) exit this screen
X) exit this screen
X) exit this screen
X) exit this screen
[1,1] QUAD 2164 >
[1,1] QUAD 2164 >
[1,1] QUAD 2164 >
[1,1] QUAD 2164 >
Field Name
Description
N
NMS Address—Selects or displays the Verilink ACP address for Node Manager (the
address of the PC that will receive the alarms). This is not any kind of TCP/IP
address, although it has the same four-octet structure. The first octet of this field
must never be lower than 128.
D
Alarm Declare Time—Selects or displays how many seconds will elapse before a
error message is activated.
A
Card Alarm Reporting—Use this option to enable or disable alarms reported from
the card to the alarm buffer and screen display. This option must be enabled to
allow normal operation of the critical line restoral feature.
Pn
Port Alarm Reporting—Use this option to enable or disable alarms reported from
each port to the alarm buffer and screen display. This option must be enabled for
each port being used by the associated IMUX 2160 module to allow normal
operation of the critical line restoral feature.
Ln
Line Restore—Use this option to determine under what circumstances a T1 port
previously removed from service will be restored after the failure clears. This
option is critical to normal QUAD/IMUX operation. See the section
in this chapter.
Cn
CRC Threshold—Use this option to specify the maximum number of CRC errors
that can occur during a 15-minute integration period before the line is removed
from service.
Sn
SES Threshold—Use this option to specify the maximum number of Severely
Errored Seconds errors that can occur before the line is removed from service.
Un
UAS Threshold—Use this option to specify the maximum number of Unavailable
Seconds errors that can occur before the line is removed from service.