Verilink QUAD/IMUX (880-502392-001) Product Manual - Manual (Page 55)

T1 Configuration Menus
Verilink QUAD/IMUX User Manual
4-3
T1 QUAD
Configuration
Menu
To configure the QUAD 2164 T1 options, select the QUAD shelf and
slot, then type “C” and press E
NTER . The QUAD 2164 Configuration
Menu appears ( Figure 4-2 ).
Figure 4-2 QUAD 2164 T1 Configuration Menu
Table 4-2 T1 Configuration Menu
Command Description Options
In In Service—Puts the selected port in service (Y) or takes it out of service
(N). Ports must be placed in service before the IMUX 2160 module can
use them.
Y or N
Fn Frame Format—Specifies the framing format as Extended Superframe
(ESF) or Superframe (SF) for the selected port. Match the framing format
provided by the network service provider (phone company).
1) SF
2) ESF
Ln Line Coding—Specifies the line coding for the selected port as
Alternating Mark Inversion (AMI) or Binary 8-Zeros Substitution (B8ZS).
You must match the line coding supplied by your network service
provider.
1) AMI
2) B8ZS
Bn Line Build Out—Specifies the line build out for the selected port. If the
T1 terminates in a network termination device (also called smart jack)
then select a line build out value of 0dB. Always use 0db for a T1
installed in the USA by a local Bell carrier, unless otherwise directed by
the carrier.
1) 0db
2) -7.5db
3) -15db
4) -22.5db
NDn Network Density—Sets the type of ones density support for the selected
port. Required only with AMI line coding.
Select NONE for a B8ZS T1. Never select NONE for an AMI T1.
1) NONE
2) 80 zeros
3) 15 zeros
4) 12.5% 80s
5) TR 62411
NLn Network Initiated Loop—Specifies if the port will respond to loopback
requests received from the T1 network. Usually set to Yes.
Y or N
-- QUAD 2164 CONFIGURATION MENU -- -- QUAD 2164 CONFIGURATION MENU -- -- QUAD 2164 CONFIGURATION MENU -- -- QUAD 2164 CONFIGURATION MENU --
PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4
In) In Service YES YES YES YES In) In Service YES YES YES YES In) In Service YES YES YES YES In) In Service YES YES YES YES
Fn) Frame Format ESF ESF ESF ESF
Fn) Frame Format ESF ESF ESF ESF Fn) Frame Format ESF ESF ESF ESF Fn) Frame Format ESF ESF ESF ESF
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS Ln) Line Coding B8ZS B8ZS B8ZS B8ZS Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Bn) Line Build Out 0db 0db 0db 0db
Bn) Line Build Out 0db 0db 0db 0db Bn) Line Build Out 0db 0db 0db 0db Bn) Line Build Out 0db 0db 0db 0db
NDn) Network Density NONE NONE NONE NONE
NDn) Network Density NONE NONE NONE NONE NDn) Network Density NONE NONE NONE NONE NDn) Network Density NONE NONE NONE NONE
NLn) Network Initiated Loop NO NO NO NO
NLn) Network Initiated Loop NO NO NO NO NLn) Network Initiated Loop NO NO NO NO NLn) Network Initiated Loop NO NO NO NO
DLn) FDL Enable NO NO NO NO
DLn) FDL Enable NO NO NO NO DLn) FDL Enable NO NO NO NO DLn) FDL Enable NO NO NO NO
PRM Enable NO NO NO NO
PRM Enable NO NO NO NO PRM Enable NO NO NO NO PRM Enable NO NO NO NO
F) FDL configuration A) alarm configuration F) FDL configuration A) alarm configuration F) FDL configuration A) alarm configuration F) FDL configuration A) alarm configuration
C) copy port D) restore defaults
C) copy port D) restore defaults C) copy port D) restore defaults C) copy port D) restore defaults
T) timing X) exit this screen
T) timing X) exit this screen T) timing X) exit this screen T) timing X) exit this screen
[1,1] QUAD 2164 > [1,1] QUAD 2164 > [1,1] QUAD 2164 > [1,1] QUAD 2164 >