Verilink QUAD/IMUX (880-502392-001) Product Manual - Manual (Page 23)

Quick Set-Up
Verilink QUAD/IMUX User Manual
2-5
Figure 2-3 NCM 2000 Node Administration Menu
Set Shelf Type 5. Select the Shelf Type submenu by typing “H” and pressing
E NTER . Indicate that you are setting the shelf type for shelf 1 by
typing “1” and pressing E NTER .
-- NCM CONTROLLER ADMINISTRATION MENU -- -- NCM CONTROLLER ADMINISTRATION MENU -- -- NCM CONTROLLER ADMINISTRATION MENU -- -- NCM CONTROLLER ADMINISTRATION MENU --
Date/Time/Zone: 79-00-01 18:29:22 PST Date/Time/Zone: 79-00-01 18:29:22 PST Date/Time/Zone: 79-00-01 18:29:22 PST Date/Time/Zone: 79-00-01 18:29:22 PST
Node Address: [0.0.0.206]
Node Address: [0.0.0.206] Node Address: [0.0.0.206] Node Address: [0.0.0.206]
Node ID: 206
Node ID: 206 Node ID: 206 Node ID: 206
Site Name: Last Shelf
Site Name: Last Shelf Site Name: Last Shelf Site Name: Last Shelf
System Uptime: 02:27:49
System Uptime: 02:27:49 System Uptime: 02:27:49 System Uptime: 02:27:49
--- Node Administration --- --- Node Administration --- --- Node Administration --- --- Node Administration ---
H) set shelf type Z) set time zone H) set shelf type Z) set time zone H) set shelf type Z) set time zone H) set shelf type Z) set time zone
T) set time D) set date
T) set time D) set date T) set time D) set date T) set time D) set date
B) download firmware Y) switch over once
B) download firmware Y) switch over once B) download firmware Y) switch over once B) download firmware Y) switch over once
W) write file to flash O) switch over permanent
W) write file to flash O) switch over permanent W) write file to flash O) switch over permanent W) write file to flash O) switch over permanent
C) set front/rear access Q) query firmware
C) set front/rear access Q) query firmware C) set front/rear access Q) query firmware C) set front/rear access Q) query firmware
U) clear card configuration R) reset card
U) clear card configuration R) reset card U) clear card configuration R) reset card U) clear card configuration R) reset card
A) set node address E) change node id
A) set node address E) change node id A) set node address E) change node id A) set node address E) change node id
I) change site name P) change password
I) change site name P) change password I) change site name P) change password I) change site name P) change password
N) network parameters S) node selection
N) network parameters S) node selection N) network parameters S) node selection N) network parameters S) node selection
M) modem parameters
M) modem parameters M) modem parameters M) modem parameters
F) flash copy (B => A)
F) flash copy (B => A) F) flash copy (B => A) F) flash copy (B => A)
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.206] [1,1] NCM 2000 > A [0.0.0.206] [1,1] NCM 2000 > A [0.0.0.206] [1,1] NCM 2000 > A [0.0.0.206] [1,1] NCM 2000 >