Visara UCT-L - Manual (Page 111)

Chapter 6. Using TN3270, TN5250, TN5250EP, 1451, VT220 and VT3270
707108-001 6-49
Configuring VT220 for an application
VT220 can be configured for a particular application by selecting Screen, Keyboard
or Color from the Setup menu.
Screen setup
From the main VT220 application screen:
1. Click Setup to open the VT220 Setup menu.
2. Click Screen.
• Cursor – Choose either an underline cursor or a block cursor.
• Blink – Select for a blinking cursor.
• Alternate Style – If reverse video is being used, selecting this will make the cursor
displayable.
• Full Screen Mode – Select to open the VT220 application in Full Screen Mode.
VT220 must be closed and reopened for this setting to become effective.
Note: To access the taskbar or minimized applications on the taskbar while Full
Screen Mode is in effect, hold down the Ctrl and Alt keys while pressing the
tab key. Press the tab key repeatedly until the name of the application you
wish to bring to the front is displayed.
Click OK to save changes and close Screen Setup, or Cancel to close and discard
any changes.