Visara UCT-L - Manual (Page 67)

Chapter 6. Using TN3270, TN5250, TN5250EP, 1451, VT220 and VT3270
707108-001 6-5
• Full Screen Mode – Select to open the TN3270 application in Full Screen Mode.
TN3270 must be closed and reopened for this setting to become effective.
Note: To access the taskbar or minimized applications on the taskbar while Full
Screen Mode is in effect, hold down the Ctrl and Alt keys while pressing the
tab key. Press the tab key repeatedly until the name of the application you
wish to bring to the front is displayed.
• Alternate Session Name – With this item unchecked, the name shown in the
Task Bar and the Title Bar is “TN3270” plus the configured session name. Checking
this item will remove the “TN3270” from the name in both locations. This is
particularly useful when there are many sessions, and the name in the Task Bar
needs to be shortened.
• WCC Controls kybd inhibit – In NonSNA console operation, MVS typically
sends console messages without a Restore Keyboard in the WCC. This can cause X-
Clock hang conditions. With this item unchecked, the TN3270 emulator will behave
as though Restore Keyboard is set in the WCC for every Write type command. With
this item checked, the Input Inhibited area of the Operator Status line will be
controlled by the actual WCC received from the host system. This is typically only
needed for NonSNA TSO sessions
Click OK to save changes and close Screen Setup, or Cancel to close and discard
any changes.
Keyboard setup
From the main TN3270 application screen:
1. Click Setup to open the TN3270 Setup menu.
2. Click Keyboard.
• Keyboard Size – Select either the 104 or 122-key keyboard.
• Disable Keyboard Macros – Prevents the user from assigning user-defined macro
functions to keys.