Visara UCT-L - Manual (Page 40)

UCT-L User’s Manual
4-16 707108-001
HAP Menu
The Host Addressable Print feature enables the host to send print requests to the attached
printer. LU2 (screen) prints are always formatted by the display according to the printer
menu selections. To enable or disable HAP, click the HAP Menu button from within
the 1480 Print Setup Screen. The Host Addressable Print configuration screen will appear:
• Enable HAP – Select to enable the HAP feature.
• Suppress Null Lines – Selection of this item will cause null lines to be removed
from formatted (40/64/80 CPI) HAP LU3 prints. Null lines are lines that contain
only non-printable characters (such as nulls, attributes or alphanumeric characters in
a non-print field).
• Suppress automatic line feed when:
– CR at MPP + 1 – If this option is selected, when the printer reaches the Maximum
Print Position + 1 (the end of the print line), the carriage returns to the beginning
of the line without a line feed. The next printed characters will overwrite the
current line of printed characters. If this option is not selected, (the default), when
the printer reaches the end of the line, the carriage returns to the beginning of the
line and drops down one line.
– NL at MPP + 1 – If this option is selected, the printer does not execute a line feed
if there is a new line command at the Maximum Print Position + 1 (the end of the
print line). The printer begins printing on the next line. If this option is not selected
(the default), when the printer reaches the end of the line, it executes two line
feeds.