Visara 1486 - Manual (Page 101)

B-2 701334-002
System Configuration
Configuring the Display Station Manually
If you have Release 1.2 or 2.0 of the AS/400 system, you can configure the 1486A/G/P
manually by using the CRTDEVDSP command with the following parameters:
CRTDEVDSP
DEVD(display-station-name)
DEVCLS(*LCL)
TYPE(3487)
MODEL(HG)
PORT(port-number)
SWTSET(device-address)
CTL(work-station-controller)
Configuring a Remotely Attached Display
You must configure a remotely attached display station manually.
Configuring the Display Station to a 5394 Remote Controller
Configure the 1486A/G/P manually by using the CRTDEVDSP command with the
following parameters:
CRTDEVDSP
DEVD(display-station-name)
DEVCLS(*RMT)
TYPE(3197)
MODEL(D2)
LOCADR(local-address)
CTL(attached-controller)
Configuring the Display Station to a 5294 Remote Controller
Configure the 1486A/G/P manually by using the CRTDEVDSP command with the
following parameters:
CRTDEVDSP
DEVD(display-station-name)
DEVCLS(*RMT)
TYPE(3180)
MODEL(2)
LOCADR(local-address)
CTL(attached-controller)