Configuring a locally attached printer, Configuring a remotely attached printer, Printer, locally attached – Visara 1486 User Manual
Page 105: Printer, remotely attached
B-6
701334-002
System Configuration
Configuring a Locally Attached Printer
To configure a printer attached to a 1486A/G/P which, in turn, is attached to a workstation
controller (WSC) or to a workstation controller-extended (WSCE), enter the CRTDEVD
command with the following parameters:
CRTDEVD
DEVD (work-station-printer-name)
DEVADR (000000)
DEVTYPE (xxxx)*
MODEL (nnnn)**
CTLU (work-station-controller)
WSCADR (xxyyzz)
TEXT (‘sample work station printer’)
To send operational messages to a display station from the printer, add MSGQ (work-
station-name).
*xxxx = 4214, 5256, or 5219.
**nnnn = 0002 for 4214 or 5256.
nnnn = 00D2 for 5219.
Configuring a Remotely Attached Printer
If you have a printer attached to a 1486A/G/P that is attached to a 5294 Model 1 Remote
Control Unit or a 5394 Remote Control Unit, enter the CRTDEVD command as described
above, but without the WSCADR parameter.