Installing the tilt/rotate stand, Figure 2-2. installing the tilt/rotate stand, Installing – Visara 1486 User Manual
Page 18: Setting up the display station -7, Figure 2-2, Installing the tilt/rotate stand -6
Advertising
2-6
701334-002
Customer Installation
Installing the Tilt/Rotate Stand
1) Turn the Display/Logic element face down with the bottom facing you.
2) Insert the four tabs on the Tilt/Rotate stand into the slots on the bottom of the Display/
Logic element and slide the Tilt/Rotate stand up until it locks into place in the slots
(see Figure 2-2, below).
3) Turn the Display/Logic element with the installed Tilt/Rotate stand upright.
Figure 2-2. Installing the Tilt/Rotate Stand
Advertising