Visara 1486 - Manual (Page 58)

3-38 701334-002
Controls, Setup Menus, and Indicators
Operator Status Row Indicators
The operator status row is the area below the last data row and is separated from the rest
of the screen by one nonintensified line. The operator status row contains symbols that
indicate the current operation conditions.
Figure 3-16. Operator Status Row Symbols
Note: The printer status symbol is always displayed if the display station is configured
for a host addressable printer (One-Display-Printer or Two- Displays-Printer).
See “Terminal Mode” on Page 3-10 for instructions on how to select the terminal
mode.
If the display station is configured for a local printer (One-Display or
Two-Displays), the printer status symbol is displayed only if the printer is
attached and powered on. If the printer is not attached, or if it is not powered on,
no printer status symbol is displayed on the operator status row.
The table on Page 3-40 describes the symbols that are displayed on the operator
status row.
Note: If a one- to three-character error code is displayed on the operator status row,
refer to “Hardware Failure Error Codes” on Page 6-3. If a four-digit error code
is displayed on the status row, refer to Appendix A, “Four-Digit Error Codes.”
N X >> –> ATTN nnn nnn nnnn + A R n/nn
System
Ready
Input
Inhibited
Local
Typeahead
Line
Error
Count
Keyboard
Shift
Diacritic
Mode Cursor
Location
Message
Waiting 1
Typeahead
Attention
Extended
Graphics
Insert
Mode
Auto
Dim
Workstation
Number
Message
Waiting 2
Keyboard
Locked
Printer
Status
Keyboard
Error
Count
Error
Code Caps
Lock
Calculator
Playback/
Record/
Pause