Westermo PMI-110-F2G - Manual (Page 100)

4.7.3 Private VLAN Information
This page allows you to see the Private VLAN information.
4.7.4 CLI Command of the PVLAN
Command Lines of the Private VLAN configuration
Feature Command Line
Private VLAN Configuration
Create VLAN
Switch(config)# vlan 2
vlan 2 success
Switch(config‐vlan)#
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
list Print command list
name Assign a name to vlan
no no
private‐vlan Configure a private VLAN
Private VLAN Type
Choose the Types
Primary Type
Isolated Type
Community Type Go to the VLAN you want configure first.
Switch(config)# vlan (VID)
Switch(config‐vlan)# private‐vlan
community Configure the VLAN as an community private VLAN
isolated Configure the VLAN as an isolated private VLAN
primary Configure the VLAN as a primary private VLAN
Switch(config‐vlan)# private‐vlan primary
<cr>
Switch(config‐vlan)# private‐vlan isolated
<cr>
Switch(config‐vlan)# private‐vlan community
<cr>
96