Westermo PMI-110-F2G - Manual (Page 93)

4.6.3 GVRP configuration
GVRP allows users to set‐up VLANs automatically rather than manual
configuration on every port of every switch in the network.
GVRP Protocol: Allow user to enable/disable GVRP globally.
State: After enable GVRP globally, here still can enable/disable GVRP by port.
Join Timer: Controls the interval of sending the GVRP Join BPDU. An instance of
this timer is required on a per‐Port, per‐GARP Participant basis
Leave Timer: Control the time to release the GVRP reservation after received the
GVRP Leave BPDU. An instance of the timer is required for each state machine
that is in the LV state
Leave All Timer: Controls the period to initiate the garbage collection of
registered VLAN. The timer is required on a per‐Port, per‐GARP Participant basis
4.6.4 VLAN Table
This table shows you current settings of your VLAN table, including VLAN ID,
Name, Status, and Egress rule of the ports.
89