Westermo PMI-110-F2G User Manual
Page 67
Description
g
w r
Set the warnin water level of total po e budget.
Examples
Set the warning
Switch(config‐if)#
water level to 60%
poe budget warning 60
Syntax
poe pd_detect enable/disable
Parameters
enable: enable PD Status Detection function
ction
disable: disable PD Status Detection fun
Command Mode
Configuration mode
Description
tection function
Enable/Disable the PD Status De
Examples
To enable the function of pd status detect function
Switch(config)# poe p
To disable the functio
d_detect enable
n of pd status detect function
Switch(configf)# poe pd_detect disable
Syntax
poe pd_detect ip_address cycle_time
Parameters
second and must be multiple of 10
IP address : A.B.C.D
Cycle time : Valid range 10‐3600
Command Mode
Configuration mode
Description
Apply a rule of PD Status Detection.
Examples
Apply a rule which ping 192.160.1.2 per 20 seconds. And if
‐enable the PoE.
192.160.1.2 is timeout, pd status detection will re
Switch(config)# poe pd_detect 192.160.1.2 20
63