Westermo PMI-110-F2G - Manual (Page 90)

Management VLAN ID: The switch supports management VLAN. The
management VLAN ID is the VLAN ID of the CPU interface so that only member
ports of the management VLAN can ping and access the switch. The default
management VLAN ID is 1.
Static VLAN: You can assign a VLAN ID and VLAN Name for new VLAN here.
VLAN ID is used by the switch to identify different VLANs. Valid VLAN ID is
between 1 and 4094. 1 is the default VLAN.
VLAN Name is a reference for network administrator to identify different VLANs.
The available character is 12 for you to input. If you don’t input VLAN name, the
system will automatically assign VLAN name for the VLAN. The rule is VLAN
(VLAN ID).
The steps to create a new VLAN: Type in VLAN ID
and NAME, and press Add to create a new VLAN.
Then you can see the new VLAN in the Static VLAN
After created the VLAN, the status of the VLAN will
remain in Unused until you add ports to the VLAN.
Note: Before you change the management VLAN ID by Web and Telnet, remember
that the port attached by the administrator should be the member port of the
management VLAN; otherwise the administrator can’t access the switch via the
network.
86