Westermo PMI-110-F2G - Manual (Page 49)

settings you made will be gone when the switch is powered off.
Click on Yes. Then the switch will be rebooted immediately .
Pop‐up message screen appears when rebooting the switch. .
4.2.10 CLI Commands for Basic Setting
Feature Command Line
Switch Setting
System Name
Switch(config)# hostname
WORD Network name of this system
Switch(config)# hostname “Switch”
SWITCH(config)#
System Location
SWITCH(config)# snmp‐server location Sweden
System Contact
SWITCH(config)# snmp‐server contact [email protected]
Display SWITCH# show snmp‐server name
SWITCH
SWITCH# show snmp‐server location
Sweden
SWITCH# show snmp‐server contact
45