Westermo PMI-110-F2G - Manual (Page 25)

Once you enter the web‐based management interface, you can freely change
the PMI’s IP address to fit your network environment.
Note 1: IE 5.0 or later versions do not allow Java applets to open sockets by
default. Users have to directly modify the browser settings to selectively enable
Java applets to use network ports.
Note 2: The Web UI connection session of PMI managed Switch will be logged
out automatically if you don’t give any input after 30 seconds. After logged out,
you should re‐login and key in correct user name and password again.
3.2.2 Secured Web Interface
Westermo web management page also provides secured management HTTPS
login. All the configuration commands will be secured and will be hard for the
hackers to sniff the login password and configuration commands.
Launch the web browser and Login.
1. Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.
2. Type https://192.168.2.200 (or the IP address of the switch). And then
press Enter.
3. The popup screen will appear and request you to trust the secured HTTPS
connection distributed by PMI PoE Managed Switch first. Click “Yes” to
trust it.
4. The login screen will appear next.
21