Westermo PMI-110-F2G - Manual (Page 86)

fa1 Designated Forwarding 200000 128.1 P2P Internal(MSTP)
fa2 Designated Forwarding 200000 128.2 P2P Internal(MSTP)
MSTP Root Information Switch# show spanning‐tree mst root
MST Root Root Root Root Max Hello Fwd
Instance Address Priority Cost Port age dly
‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐ ‐‐‐‐‐ ‐‐‐‐‐ ‐‐‐‐‐
MST00 0012.77ee.eeee 32768 0 N/A 20 2 15
MST01 0012.77ee.eeee 32768 0 N/A 20 2 15
MST02 0012.77ee.eeee 32768 0 N/A 20 2 15
MSTP Instance
Information Switch# show spanning‐tree mst 1
###### MST01 vlans mapped: 2
Bridge address 0012.77ee.eeee priority 32768 (sysid 1)
Root this switch for MST01
Port Role State Cost Prio.Nbr Type
‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
fa1 Designated Forwarding 200000 128.1 P2P Internal(MSTP)
fa2 Designated Forwarding 200000 128.2 P2P Internal(MSTP)
MSTP Port Information Switch# show spanning‐tree mst interface fa1
Interface fastethernet1 of MST00 is Designated Forwarding
Edge Port : Edge (Edge) BPDU Filter : Disabled
Link Type : Auto (Point‐to‐point) BPDU Guard : Disabled
Boundary : Internal(MSTP)
BPDUs : sent 6352, received 0
Instance Role State Cost Prio.Nbr Vlans
mapped
‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
0 Designated Forwarding 200000 128.1 1,4‐4094
1 Designated Forwarding 200000 128.1 2
2 Designated Forwarding 200000 128.1 3
Multiple Super Ring
Create or configure a
Ring
Switch(config)# multiple‐super‐ring 1
Ring 1 created
Switch(config‐multiple‐super‐ring)#
Note: 1 is the target Ring ID which is going to be created or configured.
Super Ring Version Switch(config‐multiple‐super‐ring)# version
any‐ring any ring auto detection
default set default to rapid super ring
rapid‐super‐ring rapid super ring
super‐ring super ring
Switch(config‐multiple‐super‐ring)# version rapid‐super‐ring
Priority Switch(config‐multiple‐super‐ring)# priority
<0‐255> valid range is 0 to 255
default set default
Switch(config)# super‐ring priority 100
Ring Port Switch(config‐multiple‐super‐ring)# port
IFLIST Interface list, ex: fa1,fa3‐5,gi8‐10
cost path cost
Switch(config‐multiple‐super‐ring)# port fa1,fa2
Ring Port Cost Switch(config‐multiple‐super‐ring)# port cost
<0‐255> valid range is 0 or 255
default set default (128)valid range is 0 or 255
Switch(config‐multiple‐super‐ring)# port cost 100
<0‐255> valid range is 0 or 255
default set default (128)valid range is 0 or 255
82