3 wiring the relay output (do), Wiring the relay output (do) – Westermo PMI-110-F2G User Manual
Page 17
Advertising
2.3
Wiring the Relay Output (DO)
The relay output contacts are in the bottom side as shown on below figure. The relay
output (DO) is controlled by the pre‐defined operating rules. To activate relay output
function, please refer to the CD User’s Manual for more Relay Output management
information.
Note: The relay contact only supports 0.5 A current, DC 24V. It is not recommended to apply
voltage and current higher than the specifications.
13
Advertising