H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 10)

2
Figure 2 Rear panel of the WX6103
1 2
3
4
5
1: Caution sign 2: Air filter (optional)
3: Rear panel handle 4: Grounding sign
5: Grounding terminals
WARNING!
The chassis rear panel handle, as shown in callout 3 of Figure 2 , is designed only to facilitate removal of
the rear panel but not to support the weight of the chassis. Do not hold the handle to move the chassis.
Dimensions and weight
Table 1 Dimensions and weight
Item Description
Dimensions (H × W × D)
176 × 436 × 420 mm (6.93 × 17.17 × 16.54 in)
NOTE:
• H: Height of the access controller without footing pads.
• W: Width of the access controller without mounting brackets.
• D: Depth of the access controller without the handle on the rear panel.
25.2 kg (55.56 lb) (two EWPX1WCMB0 main control boards)
25.8 kg (56.88 lb) (two EWPX1WCMD0 main control boards)
Weight (full configuration)
25.5 kg (56.22 lb) (one EWPX1WCMD0 and one EWPX1WCMD0 main
control board)
Power supply
The power supply of the WX6103 is at the upper side of the chassis, as shown in callout 2 of Figure 1 .