H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 82

Advertising

|<2> 19200 |

|<3> 38400 |

|<4> 57600 |

|<5> 115200* |

|<0> Exit |

============================================================================

Enter your choice(0-5):

Step5

Select 0 to return to the BootWare operation serial interface submenu.

======================<BOOTWARE OPERATION SERIAL SUB-MENU>================

|<1> Update Full BootWare |

|<2> Update Extend BootWare |

|<3> Update Basic BootWare |

|<4> Modify Serial Interface Parameter |

|<0> Exit To Main Menu |

==========================================================================

Enter your choice(0-4):

Step6

Select 1 in the BootWare operation serial interface submenu. The following prompt appears:

Please Start To Transfer File, Press <Ctrl+C> To Exit.

Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

Step7

Select Transfer > Send file… in the HyperTerminal window. The following dialog box appears:

Figure 52 Send File dialog box

Step8

Click Browse… to select the application file to be downloaded, and select Xmodem from the Protocol

drop-down list. Then click Send. The following dialog box appears:

Advertising